Voltvik is under development and is not sold. We keep a list of those who want to hear from us when there is something to try. No payment, no commitment and no promised date.
Blikk is the one we are building first, and it is the main product. Vri will be bigger and gets a physical rotary wheel you can turn. Underneath they are nearly identical, so most of what we build for one works on the other too.
The small round screen, operated by touch. Small enough to mount several of them in the same vehicle.
Indicative price: NOK 899
The larger round screen with a physical rotary wheel. The hardware has not been ordered, and work will not begin until Blikk has been validated further.
Indicative price: NOK 1,599
We do not accept payment and reserve nothing. You will be notified when Voltvik takes the next validation step, and again on the day the device can actually be bought.
Blikk has been run end to end on real hardware: screen, touch, Bluetooth and WiFi at the same time, with wireless updates. The device connects to the network on the first attempt and then remains stable, without unexpected restarts. Mopeka Pro Check H2O and Pro Check LPG have been verified with real level, depth, temperature and battery percentage, and Victron SmartShunt/BMV-712, SmartSolar MPPT and Orion XS have been read from real equipment. Three RuuviTag sensors are installed in a motorhome and read temperature, humidity and air pressure — both indoor and outdoor variants.
Test devices are lent out and taken back. They are marked “prototype — not for sale” and are not transferred to anyone. No money changes hands.
Company formation, CE marking, EE registration and trademark are handled after the product has been validated. Only when all that is in place can anyone buy a Voltvik.
No. There is no device to buy, and the product is not sold. We do not accept payment, deposits or reservations. The interest list is only a way to be notified.
We have no date, and we are not going to invent one. The Victron reading and RuuviTag indoor and outdoor have now been run against real equipment, so the next milestone is to show several devices of the same type at the same time — two batteries, several chargers, several sensors. If it goes well, certification and company formation follow afterwards. If it does not go well, we will say that too.
Blikk has a small round screen with touch, and is the one we are building first. Vri has a larger screen and a physical rotary wheel you can use with gloves. They run the same firmware and show the same eight pages.
No. Mopeka tank sensors are read without Victron equipment. Lippert/Furrion is not supported. BMS support has been written for JK-BMS, but requires more memory than Blikk has, so it requires Vri (Pro). See the compatibility table on the front page for details.
No. The device is intended to work standalone without account, cloud or subscription. Home Assistant is optional, not required.
Read through the setup or ask us a question before registering interest. We answer honestly about what works and what does not yet.